03 / IndustriesStudio model, not a job

Industrial platforms and frames

Platforms, walkways, stairs and the frames that carry machines or tanks. Most of them meet something that already stands: a building, a machine, a floor. The drawing has to know that interface before any steel is ordered.

01 / 03

What is drawn for a platform or a frame

The arrangement: a plan, the elevations and the joints, with every main member marked so it can be detailed on its own sheet. The interface with what already stands is drawn from dimensions the client supplies or measures.

Stairs, ladders, handrails and the deck, when they are in the brief. Workshop drawings follow only for the parts in the scope; not every member needs a sheet of its own.

Drag sideways to turn the model

  1. Column on a base plateStudio model, not a job
  2. Main beamStudio model, not a job
  3. Secondary beamStudio model, not a job
  4. Grating deckStudio model, not a job
  5. HandrailStudio model, not a job

02 / 03

Which files come out of it

A PDF of the arrangement and of each workshop sheet, with the title block and the revision. A DXF at 1:1 for base plates, gussets and the other cut parts. A STEP file of the weldments when the fabricator wants the solid. The reply names which of these the job needs.

03 / 03

What this page does not promise

This page does not promise a load rating, a structural approval or a fabrication contract. The loads and the standard to design to are named in the brief. If a structural check is part of the scope, the reply says so; if it is not, the drawing does not imply one.

Quote

Drawn for your job, not for a sector.

The sector only sets the questions. Describe your object, its limits and the files you have, and the reply names what will be drawn, in which files, and what is not in the job.

What matters hereIndustrial platforms and frames

What a set for this sector has to resolve.

The questions a drawing set in this sector usually has to answer before anything is cut. The enquiry does not need every answer; the reply asks for what is missing.

  1. 01

    The interface with what stands

    A platform fixes to a building, a machine or a slab this office did not draw. Those dimensions are measured or supplied, and the drawing says which.

  2. 02

    Joints split for transport

    Where a frame is too large to travel in one piece, the splice positions and the site joints are chosen on the drawing, not in the yard.

  3. 03

    Marks that match the parts

    Every main member carries a mark on the arrangement and the same mark on its workshop sheet, so the site assembles exactly what the workshop welded.

  4. 04

    Access and clear space

    Stairs, ladders and gates go where people actually walk, and the space a machine needs for maintenance stays clear of members.

Related services

The kinds of work that cover this sector.

All services

Each one has its own page with the full scope, the files and what it does not promise.

Other sectors

The other sectors the office draws for.

All sectors

Contact

How to reach the office.

For a job, use the enquiry form: it sends your drawings and models with the request. For anything else, write to one of the two addresses.

Sales and general enquiries
[email protected]
Direct contact
[email protected]

06 / Quote

Name the sector in the enquiry.

Say which sector the job belongs to, what should be drawn and which files you already have. A person reads it and replies by email to the address you type.