02 / Work

Studio examples of a drawing set.

A customer drawing will be shown here only with permission. Until then these are drawings made in the studio, so the structure of a sheet is visible. Each one is marked as an example.

01 / WorkStudio model, not a job

Studio example: a container module

A general arrangement showing the outline, the door end and one opening on the long side. The dimensions are letters, not the sizes of a job.

Studio example. This is not a customer project and it is not a drawing to cut from.

Drag sideways to turn the model

  1. Corner post and rail frameStudio example. This is not a customer project and it is not a drawing to cut from.
  2. Long wallStudio example. This is not a customer project and it is not a drawing to cut from.
  3. End walls and far wallStudio example. This is not a customer project and it is not a drawing to cut from.
  4. RoofStudio example. This is not a customer project and it is not a drawing to cut from.
  5. Trim around the openingStudio example. This is not a customer project and it is not a drawing to cut from.

02 / WorkStudio model, not a job

Studio example: a platform frame

A plan and an elevation of a frame. Only enough columns and beams to show what belongs on the arrangement, and what waits for a workshop sheet.

Studio example. The frame in the drawing was not commissioned or built for a particular customer.

Drag sideways to turn the model

  1. Column on a base plateStudio example. The frame in the drawing was not commissioned or built for a particular customer.
  2. Main beamStudio example. The frame in the drawing was not commissioned or built for a particular customer.
  3. Secondary beamStudio example. The frame in the drawing was not commissioned or built for a particular customer.
  4. Grating deckStudio example. The frame in the drawing was not commissioned or built for a particular customer.
  5. HandrailStudio example. The frame in the drawing was not commissioned or built for a particular customer.

03 / WorkStudio model, not a job

Studio example: coordinating an opening

The opening is dimensioned from an agreed corner. The trim is on the same sheet. The door infill is on it only when the brief includes it.

Studio example. No drawing number, no customer, no building.

Drag sideways to turn the model

  1. Corner post and rail frameStudio example. No drawing number, no customer, no building.
  2. Long wallStudio example. No drawing number, no customer, no building.
  3. End walls and far wallStudio example. No drawing number, no customer, no building.
  4. RoofStudio example. No drawing number, no customer, no building.
  5. Trim around the openingStudio example. No drawing number, no customer, no building.

Studio examplesStudio model, not a job

Three sheets, each marked as an example.

Each one shows a convention of a real set: where dimensions start, what belongs on an arrangement, how an opening is placed. None of them is a customer job.

On every sheet

What every sheet in a set carries.

The studio examples follow the same conventions as an issued set.

  1. 01

    One origin

    Openings and parts are dimensioned from one agreed corner, never each from a different edge.

  2. 02

    Views that belong together

    A general arrangement first: elevation, plan and section. Workshop sheets of single parts follow only when they are in the scope.

  3. 03

    Title block and revision

    Every sheet names its units, its general tolerance and its revision. A comment changes the revision, never the same sheet in silence.

  4. 04

    Files that match the sheet

    DXF and STEP carry the same geometry as the PDF. Dimension text and the sheet border stay out of the cut file.

06 / Quote

A set like this, for your own job.

Send the object, its limits and the files you have. The reply names what will be drawn and in which files.