03 / Process

Four steps, and no calendar.

How an enquiry becomes a drawing. A count of days does not belong here until a particular reply has agreed it.

The drawing office

From enquiry to issue

Enquiry, scope, draft and issue. This page states no durations. A date is confirmed in the reply, not in the website text.

  1. 01

    Enquiry

    The object, the limits, and the files you already have. A date you hope for is a request.

  2. 02

    Scope

    The reply names what will be drawn, in which files, and what is not in the job.

  3. 03

    Draft

    A set to comment on. A comment changes the revision. It does not silently edit the same sheet.

  4. 04

    Issue

    The agreed formats. A PDF to read, and DXF and STEP where they were in the scope.

The hall's production lineTo 20 mm on a 2 x 4 m bed

CNC laser cutting

The beam walks the plate; a glowing cut edge follows it.

Published process
To 20 mm on a 2 x 4 m bed

Drag sideways to turn the model

Ferrota draws. Welded structures are built by the sister brand Tanax Structures in the TANAX TRUCKS hall in Bánovce nad Bebravou. These are its published machines and processes, as schematics built in code.

Source: tanaxstructures.com, published figures

  1. 2 x 4 m bedTo 20 mm on a 2 x 4 m bed
  2. PlateTo 20 mm on a 2 x 4 m bed
  3. GantryTo 20 mm on a 2 x 4 m bed
  4. Cutting headTo 20 mm on a 2 x 4 m bed

02 / 08400 t, 6 050 mm table

Press brake

The ram comes down and folds the sheet along the full table.

Published process
400 t, 6 050 mm table

Drag sideways to turn the model

  1. Press frame400 t, 6 050 mm table
  2. 6 050 mm table400 t, 6 050 mm table
  3. Ram and tool400 t, 6 050 mm table
  4. Sheet being bent400 t, 6 050 mm table

03 / 08Manual and robotic, under EN ISO 3834-2

MAG welding

The seam runs along the frame; joints glow and cool.

Published process
Manual and robotic, under EN ISO 3834-2

Drag sideways to turn the model

  1. Welding tableManual and robotic, under EN ISO 3834-2
  2. Frame being weldedManual and robotic, under EN ISO 3834-2
  3. TorchManual and robotic, under EN ISO 3834-2

04 / 0814 m

Robotic welding track

The carriage with the robot travels along fixtures holding a series of parts.

Published process
14 m

Drag sideways to turn the model

  1. 14 m track14 m
  2. Carriage14 m
  3. Robot arm14 m
  4. Fixtures with parts14 m

05 / 08Travel to 8 000 mm

Horizontal boring

After welding: the table with the part traverses the spindle so faces come out flat and bores true.

Published process
Travel to 8 000 mm

Drag sideways to turn the model

  1. Bed with 8 000 mm of travelTravel to 8 000 mm
  2. ColumnTravel to 8 000 mm
  3. Spindle headTravel to 8 000 mm
  4. Table with the partTravel to 8 000 mm

06 / 08To Sa 2½ in an 8 x 5 x 3 m chamber

Blasting

Grit in a haze; the surface turns from mill scale to bright steel.

Published process
To Sa 2½ in an 8 x 5 x 3 m chamber

Drag sideways to turn the model

  1. 8 x 5 x 3 m chamberTo Sa 2½ in an 8 x 5 x 3 m chamber
  2. Part on the railTo Sa 2½ in an 8 x 5 x 3 m chamber
  3. Rail to the boothTo Sa 2½ in an 8 x 5 x 3 m chamber

07 / 08Spray and curing booth connected by rail

Wet painting

The part rolls on the rail from the chamber into the booth and takes its colour.

Published process
Spray and curing booth connected by rail

Drag sideways to turn the model

  1. Spray and curing boothSpray and curing booth connected by rail
  2. PartSpray and curing booth connected by rail
  3. RailSpray and curing booth connected by rail

08 / 08Six-axis measuring arm

FARO arm measurement

The probe walks the frame and leaves measurement points to compare with the drawing.

Published process
Six-axis measuring arm

Drag sideways to turn the model

  1. Measured frameSix-axis measuring arm
  2. Arm baseSix-axis measuring arm
  3. Touch probeSix-axis measuring arm

The hall's production line

Where the drawing goes next.

The issued set can go to the group's own hall, shown above, or to any workshop you choose. Either way it is drawn to be read without the person who drew it.

Step by step

What each step needs, and what comes back.

The same four steps for every kind of work. What you send decides how many questions come back.

  1. 01

    Enquiry

    You send
    The object, its limits, the files you already have and the date you hope for.
    The office delivers
    A reply by email, written by a person, to the address you typed.
  2. 02

    Scope

    You send
    Answers, if the reply asks about something the files do not show.
    The office delivers
    What will be drawn, in which files, what is not in the job, and the date.
  3. 03

    Draft

    You send
    Comments on the set, sheet by sheet.
    The office delivers
    A new revision for each round of comments, never a silent edit of the same sheet.
  4. 04

    Issue

    You send
    Your confirmation that the last revision is the one to build from.
    The office delivers
    The agreed formats: the PDF to read, and DXF, STEP or DWG where they were in the scope.

Good to know

Dates, revisions and formats.

  1. 01

    Dates

    A duration depends on the object, the files that already exist and the rounds of comments. The date is agreed in the reply, never promised in advance on this page.

  2. 02

    Revisions

    Every round of comments gives a new revision. The title block says which one is current, so nobody builds from an old sheet.

  3. 03

    Formats

    PDF, DXF, STEP and DWG. Which of them a job delivers is written into the scope, not added by assumption.

Journal

Read before step one.

The whole journal

How to prepare an RFQ for steel fabrication drawings

What to put in a request when you need a construction design or production drawings: the object, the constraints, the files you already have, and the formats you need back.

Tolerances and title blocks on a workshop drawing

A drawing with no tolerance note leaves the shop to guess. What belongs in the title block, how a revision is written, and why a sheet needs one origin.

06 / Quote

Start with step one.

The enquiry form asks for exactly what step one needs: the object, its limits, your files and the date you hope for.