Journal
DXF, STEP and DWG: which file to send, which to expect
These three extensions are often treated as interchangeable in a request. They are not. Each one carries a different part of the work, and none of them replaces the other two.
DXF
DXF is an exchange file for geometry. For laser and plasma cutting it is a 2D DXF in millimetres, at 1:1, with a closed profile. Dimension text, the sheet border and the title block do not belong in the cut file. If they stay in, the machine can read them as geometry. One part per file, or clearly separated layers, avoids a shop-floor mistake.
DWG
DWG is the file the drawing is edited in. It carries layers, blocks, the sheet layout and the title block. It is the source a PDF is plotted from, and the source a clean DXF can be taken from. A DWG is not itself a cut file, even when the geometry is inside it. If you are sending someone else's drawing for review, DWG is the right source, because the way the sheet was assembled is still visible.
STEP
STEP, with the extension .step or .stp, is a neutral solid model. It carries bodies between CAD systems. It does not carry a title block, a revision, dimensions or a tolerance note. A fabricator can see how the parts meet. They cannot see which dimension is binding and which is only a result of the model. STEP accompanies the drawing. It does not replace it.
- For a person to read: PDF.
- For cutting plate and profile: DXF at 1:1.
- For editing the drawing and reviewing the sheet: DWG.
- For the solid of a weldment: STEP.
A file whose contents the enquiry gate does not recognise is zipped in the browser before it is sent. That applies to STEP, IGES, DXF and DWG. A PDF is sent as it is.
Related